Fully assembled · no flat-packs
Australia’s Easiest DIY Pool Fence
Pool Perf® panels turn up fully assembled - squared, riveted, and finished at our factory. Stand them up, fix them off. No flat-pack, no fabricating, no second pair of hands.
Watch this before you order anything
DIY PoolPerf installation in Action
One person. Ordinary tools. Nothing sped up and nothing edited out. Four minutes from now you will know exactly what your weekend looks like - and whether this is a job you want to do yourself.
Why Pool Perf suits DIY
Arrives Fully Assembled
Just Fully Assembled panels ready to go.
A one-person job
Panels weigh 5–13kg. You don’t need a mate and a sucker-lifter.
Expensive Tools not Req
Only requires a drill, tape measure, hammer and a level.
Compliant product
AS1926.1, NATA tested, Perf Safe® certified - and 10-year warranty.
Standard sizes online · everything else made to order
Shop standard sizes & colours
OR Custom made to Order
Standard sizes and colours are in the shop so you can order them in five minutes. Everything else we make to your measurements. If your run doesn’t divide neatly, your ground falls away, or you want a design and a colour nobody else has - just ask. That is the part of the business we have been doing longest.
Up to 3000mm wide and 1500mm tall, cut to your exact post-to-post measurement.
Raked panels that follow a slope or a set of stairs, and curved runs.
Pure Perf®, the standard design range, or your own pattern punched to order.
Endless Dulux® and Interpon® powder coat colours, matched to your house.
Three steps and a weekend
Most of the work is in the measuring. Get that right and the rest is fixing panels.
1. Measure
Post-to-post, working from the bottom of the post. Our measuring guides give you the exact formula for each system.
2. Order
Choose your design, colour and sizes. We build to your measurements and assemble it free of charge.
3. Install
Panels arrive wrapped and palletised. Follow the guide for your fixing method and post type.
Pick your fixing method
Two systems, both DIY-friendly. Channel Fit is the cleanest look; Bracket Fit is the most forgiving if your ground or posts aren’t perfectly regular.
Why not just buy the cheap import?
Because Pool Perf® arrives fully assembled and compliant. The imported kits arrive as a box of parts, and whether the finished barrier complies is entirely down to how well you put it together.
That’s the whole difference, and it’s worth sitting with for a second. A pool barrier is the one thing in your backyard that exists to stop a child drowning. If you assemble a kit slightly out of square, or the infill ends up loose in the frame, you don’t get a warning - you get a fence that looks finished and isn’t compliant.
Are you willing to bet your family’s safety on your own assembly? With Pool Perf® you don’t have to. The panel is built, squared and certified before it leaves our factory. You’re fixing a finished, compliant panel in place - not manufacturing one in your backyard and hoping.
- Arrives fully assembled - nothing to build, nothing to get wrong
- Made to your sizes - no cutting sheet or frame on site
- Tabbed-and-slotted frame - unique to Pool Perf®, and it stays square
- AS1926.1 tested, with Form 15 compliance documentation supplied
- Textured powder coat in endless colours, not scratch-prone satin black only
- 2.5mm 5052 marine-grade aluminium, spanning to 3m where most stop at 2m
In a photo, ours and theirs look the same. It’s the knock-off watch problem - looks Swiss until you hold the real thing.
Sad fact
We get these calls every week
People ring us who would have been absolutely fine installing Pool Perf®, but who bought an imported kit instead. They’re halfway through, something has gone wrong, and they’re asking whether we can help.
Usually we can’t. By the time they call, it’s too late - the parts are cut, the money is spent, and it isn’t our product. Here’s what they actually ask us:
| What they ring us about | With Pool Perf® |
|---|---|
| “How do I cut down the sheet?” | You don’t - not with Pool Perf®. Panels are made to your measurements, so there’s no sheet to cut. |
| “I cut the frame too short.” | Not something that can happen here. The frame arrives built to size. |
| “It’s not square.” | That’s a shame. Our tabbed-and-slotted frame is square before it leaves the factory and stays that way. |
| “The screen has gone loose in the frame.” | That won’t pass compliance. Ours is riveted right around the perimeter before it ships. |
| “It only comes in black - can I wet paint it?” | Good luck getting between the holes. Easier to have it powder coated the colour you wanted in the first place - which we’d have done for you. |
None of this is us being clever after the fact. It’s the predictable result of shipping someone a flat-pack and leaving the assembly - and therefore the compliance - up to them. We just don’t do it that way.
People who did it themselves
“From the first email to delivery Decoview / PoolPerf have been wonderful to deal with. My new pool fence looks AMAZING, I couldn’t be happier with it. All my friends and family love the look of it too. DIY was easy too.”
Philip Calpakdjian
“We ordered 13 individually sized panels at a custom height, each panel fitted perfectly. Install was simple. It looks great and the best thing is that it’s not glass and I won’t be having to constantly clean it!”
Rowena Golledge
“I’m a builder in NSW. I would recommend Decoview to all tradesmen. The customer service was great and most importantly the product was of very high quality and easy to install!”
David Phillips
Budget a bit tight? Look at PolyPerf®
Same Pure Perf® look, same textured black aluminium frame, but with a Stealth Matt Black HDPE infill instead of punched aluminium - at a noticeably lower price point. Still AS1926.1 compliant, still part of the Perf Safe® range, still assembled free of charge before it ships.
You can even mix and match - PolyPerf® along the boundary runs, Pool Perf® where people actually look.
Compare PolyPerf® →
Decided it’s not for you?
No problem at all. If installing your own pool fence isn’t for you, we have many trusted and expert Trade Partners around Australia who are more than willing to lend a hand - licensed local installers who do this every week and handle the compliance side for you.
Ready to order?
Measure up, choose your design and colour, and we’ll build it to your sizes and assemble it free.
Talk it through with a Pool Perf® specialist
Free, no obligation. Measuring, fixing method, gates, custom sizes and colours. Bring your numbers and we’ll work through them with you before you order.
Get Your Buyers Guide Now
- Current pricing, plainly set out
- The full design and colour range
- Channel Fit vs Bracket Fit, compared
- Measuring, gates and compliance
