Complete Channel Fit install, core drilled
The whole job start to finish. If you only watch one, watch this one.
Video instructions
Are you more visual?
Then don’t read it - watch it. Every step of a Pool Perf® install, filmed in real time, in short clips you can prop your phone up against while you work.
Watch our videosEvery install video, in one place
Pick the method you are using and work through it a step at a time. Nothing is sped up, and nothing is edited out.
Complete Bracket Fit panel install
The full Bracket Fit process, in four steps.
Complete gate install
Panels done? Here is the gate, start to finish.
Step 1 - Core drill
Core drill your holes to get started.
Step 2 - The plug
Your hole is done. Now remove the plug.
Step 3 - Cover ring
Don't forget the cover ring before the channel goes on.
Step 4 - Screw the channel
Screw the channel on, ready for the panel.
Step 5 - Panel fit
Easy enough for one person. Slide it in.
Step 6 - Screw the panel
Fix off with the self-tapping powder-coated screws.
Step 1 - Bracket installation
Start by screwing the brackets to the post.
Step 2 - Check your panel
Check the clip side faces the inside of the pool.
Step 3 - Bottom brackets
Screw on the bottom brackets.
Step 4 - Clip in brackets
Clip in, screw it off, and you are done.
Core drill Channel Fit - the full walkthrough
Real time, nothing edited out. The one to watch before you order.
Unpacking your Pool Perf® order
What turns up on the pallet, and how to check it.
A customer's own install
Someone who had never done it before.
A customer's own install
Straight runs, gate and all.
A customer's own install
Start to finish over a weekend.
No videos in that category yet.
Prefer the drawings? Every dimension and component is in the manual.
Open the Installation ManualPress Esc to close
Worth a look
Two short ones that answer the questions people ask most.
See-Through Transparency
10mm holes - strong, and you can still see the kids.
AS1926.1 Strength Test
Independently tested at a NATA-certified lab.
Decided it’s not for you?
No problem at all. If installing your own pool fence isn’t for you, we have many trusted and expert Trade Partners around Australia who are more than willing to lend a hand - licensed local installers who do this every week and handle the compliance side for you.
Seen enough?
Order your panels and we’ll build them to your measurements.
Talk it through with a Pool Perf® specialist
Free, no obligation. Measuring, fixing method, gates, custom sizes and colours. Bring your numbers and we’ll work through them with you before you order.
Get Your Buyers Guide Now
- Current pricing, plainly set out
- The full design and colour range
- Channel Fit vs Bracket Fit, compared
- Measuring, gates and compliance
